Development of a Local-Scale Spatially Refined Multimedia Fate Model (LSRMFM) for Urban-Scale Risk Assessment: Model Formulation, GIS-Based Preprocessing, and Case Study

A local-scale spatially refined multimedia fate model (LSRMFM) was developed to evaluate in detail the multimedia transport of organic compounds at a spatial level. The model was derived using a combination of an advection?Cdispersion?Creaction partial differential equation, a steady-state multimedia fugacity model, and a geographical information system. The model was applied to predicting four major volatile organic compounds that are produced as emissions (benzene, toluene, xylene, and styrene) in an urban and industrial area (the 50?×?50-km area was divided into 0.5?×?0.5-km segments) in Korea. To test the accuracy of the model, the LSRMFM was used to predict the extent of dispersion and the data compared with actual measured concentrations and the results of a generic multimedia fate model (GMFM). The results indicated that the method developed herein is appropriate for predicting long-term multimedia pollution. However, the comparison study also illustrated that the developed model has some limitations (e.g., steady-state assumption) in terms of explaining all the observed concentrations, and additional verification and study (e.g., validation using a large observed data set, integration with a more accurate runoff model) would be desirable. In comparing LSRMFM and GMFM, discrepancies between the LSRMFM and GMFM outputs were found, as the result of geographical effects, even though the environmental parameters were identical. The geographical variation for LSRMFM output indicated the existence of considerable local human and ecological risks, whereas the GMFM output indicated less average risk. These results demonstrate that the model has the potential for improving the management of pollutant levels under these refined spatial conditions.     

Antecedents and consequences of satisfaction with work–family balance: A moderating role of perceived insider status

This study developed a moderated mediation model to investigate how family‐supportive paid leave and supervision affect employees' satisfaction with work–family balance and in turn their affective organizational commitment and supervisor‐directed organizational citizenship behavior depending on their perceived insider status in the organization. Our analysis of data collected from 118 employee–supervisor dyads in Korean organizations revealed that satisfaction with work–family balance mediated the linkages from family‐supportive supervision to affective organizational commitment and supervisor‐directed organizational citizenship behavior, and the linkage from family‐supportive paid leave to affective organizational commitment. Results further showed that the entire mediational process for family‐supportive supervision was more pronounced for those who perceived themselves to be an insider of their organizations, while the same pattern was not found for the meditational process related to family‐supportive paid leave. Our findings provide theoretical implications for work–family balance research and offer practical suggestions to make employees satisfied with work–family balance.     

Evaluation of PCDD/Fs characterization in animal feed and feed additives

Safety control of feed and feed additives is necessary to have safe food of animal origin. Based on media reports, nine incidents regarding dioxins and/or PCBs contaminations occurred worldwide during the last decade. Korea is a country which imports feed and feed additives. In this study, various kinds of feed and feed additives were analyzed to monitor the contamination level of dioxins. The level of PCDD/Fs in fish oil was the highest with a concentration of 23.33ngkg(-1), which is equivalent to a toxicological concentration of 4.68ngWHO-TEQ/kg. Feed from animals origin such as chicken meal, animal fat, fish meal, fish oil, and shell powder showed relatively higher concentrations of PCDD/Fs. Feed from plants origin, minerals, and additives ranged from non-detects for bit pulp and ethoxyquin to 8.28ngkg(-1) for dl-methionine. From a toxicological point of view, the highest concentration in vitamins was 0.08ngWHO-TEQ/kg among the feed additives. 2,3,4,7,8-PeCDF was the dominant congener in samples of fish oil, fish meal, and shell powder. Animal fat showed that the pattern of PCDD/Fs depends on the sources of contamination. A sample of animal fat showed 1,2,3,4,7,8-HxCDF and the other sample showed 1,2,3,4,7,8-HxCDD as a primary congener. Generally, low levels of PCDDs were detected in feed additives. Patterns of PCDD/Fs in choline chloride were different with that in choline chloride from an incident in Europe in 2000.     

Halide salts accelerate degradation of high explosives by zerovalent iron

Zerovalent iron (Fe(0), ZVI) has drawn great interest as an inexpensive and effective material to promote the degradation of environmental contaminants. A focus of ZVI research is to increase degradation kinetics and overcome passivation for long-term remediation. Halide ions promote corrosion, which can increase and sustain ZVI reactivity. Adding chloride or bromide salts with Fe(0) (1% w/v) greatly enhanced TNT, RDX, and HMX degradation rates in aqueous solution. Adding Cl or Br salts after 24h also restored ZVI reactivity, resulting in complete degradation within 8h. These observations may be attributed to removal of the passivating oxide layer and pitting corrosion of the iron. While the relative increase in degradation rate by Cl(-) and Br(-) was similar, TNT degraded faster than RDX and HMX. HMX was most difficult to remove using ZVI alone but ZVI remained effective after five HMX reseeding cycles when Br(-) was present in solution.     

Solidification and recycling of incinerator bottom ash through the addition of colloidal silica (SiO2) solution

The possibility of using incinerator bottom ash as a substitute for natural aggregates was investigated. Rough, porous surface of bottom ash, which diminishes the strength of solidified products, was improved by colloidal silica solution. As a result, a significant increase of mechanical strength was accomplished by a slight amount of silica (<1 wt% to total). Moreover, pozzolanic reaction was induced in initial cement hydration due to the nano-particle size of about 20 nm in colloidal silica solution. Cylindrical specimens and bricks were prepared from bottom ash added to a colloidal silica (SiO2) solution and cement, and then their compressive strengths were evaluated. Cylindrical specimens showed an increase of approximately 60% in compressive strength when colloidal solution containing 4 wt% silica particles was sprayed onto the bottom ash. The strength of bricks containing colloidal silica was in excess of 20 MPa, which meets the requirement of construction materials. Results of leaching tests based on Toxicity Characteristic Leaching Procedure (TCLP) proved that the solidified bottom ash possessed good chemical stability.     

Advantages and possibilities of solid recovered fuel cocombustion in the European energy sector

The 1999/31 Elemental Carbon Directive sets strict rules on the disposal of untreated municipal solid waste in the European Union countries and forces a reduction of the biodegradable quantities disposed off to landfills up to 35% of the amount produced in 1995 in the coming decade. More environmentally friendly waste management options shall be promoted under the framework of the Community Waste Strategy ([96] 399 Final). In this context, the production and thermal use of solid recovered fuels (SRFs), derived from nonhazardous bioresidues and mixed- and mono-waste streams, could be a key element in a future waste management system. Within the scope of the European Demonstration Project, RECOFUEL, SRF cocombustion was demonstrated in two large-scale lignite-fired coal boilers at RWE power station in Weisweiler, Germany. As a consequence of the high biogenic share of the cocombusted material, this approach can be considered beneficial following European Directive 2001/77/EC on electricity from renewable energy sources (directive). During the experimental campaign, the share of SRF in the overall thermal input was adjusted to approximately 2%, resulting into a feeding rate of approximately 25 t/hr. The measurement campaign included boiler measurements in different locations, fuel and ash sampling, and its characterization. The corrosion rates were monitored by dedicated corrosion probes. The overall results showed no significant influence of SRF cocombustion on boiler operation, emissions behavior, and residues quality for the thermal shares applied. Also, no effect of the increased chlorine concentration of the recovered fuel was observed in the flue gas path after the desulfurization unit.     

Reconstruction of an interrupted primary beach plain succession using a Geographical Information System

This study reports on a primary succession on a beach plain on the Dutch Wadden island of Schiermonnikoog. Vegetation succession started in 1959 when a sand dike was constructed to prevent structural erosion of the area by storm floods. Since then the sandy beach behind the dike has been protected from the direct influence of the North Sea. Heavy storms in 1972, however, created a large gap in the dike which has remained open since. Occasional storm floods during winter penetrate deeply into the area and salt water can cover parts of the beach plain for several months. This had a pronounced impact on the vegetation. Vegetation maps for six different years and data from a permanent plot have been used to reconstruct vegetation succession over a 42-yr period. Certain parts of the area seem to have changed little, while others have developed a grassland or scrub cover. The heavy storms and associated processes such as sand blowing, intensive flooding and increased salinity have created a disturbance/stress gradient of progressive and regressive succession across the beach plain. In certain places the vegetation cover has repeatedly been destroyed and succession re-initiated. It is concluded that the different stages of succession and associated diversity of plant species only can persist through the maintenance of the natural dynamics of the area.     

中国生物质能政策变迁研究:2000—2019年

生物质柴油和生物质沼气是生物质能发展的两大着力点,两者在性质上存在较大差异,相应的政策设计和发展也各有不同。以政策网络理论、政策变迁相关理论为理论基础,通过搜集整理中央层面关于生物质柴油和生物质沼气的政策文本,采用政策计量和内容分析法,分析政策的发文时间、文本类型等文本外部属性特征,且根据政策文本内容划分了5类政策目标和13类政策工具,深入比较不同生物质能源在变迁中政策目标、政策工具和政策主体网络的差异。研究结果表明,中国生物质能的政策变迁,呈现多元化的演进动态:(1)生物质柴油与沼气政策的发文单位与发文类型在各时间段有所异同,整体来看,生物质柴油与沼气发文最多的单位为国务院和国家发展和改革委员会,不同的是生物质柴油发文数量位于第三位的是国家能源局,而生物质沼气是生态环境部和农业农村部。在发文类型方面,"通知与意见"类型构成了主要占比。(2)同一生物质的政策目标与工具在不同时期的政策变迁中,有延续性和差异性。例如,生物质柴油在各阶段始终以技术创新、能源供应连续性为主要政策目标来保证政策延续性,但在不同阶段也会关注环境可持续性、工业发展等;在政策工具上,生物质柴油即使在变迁中也都会使用财政支持,而各阶段配合使用的工具重心也不一致。(3)不同生物质能源使用的政策工具在同一时期也存在异同。如在第二阶段生物质柴油和生物质沼气所聚焦的政策目标和政策工具完全不同,在第一和第三阶段两者则存在小部分相似。(4)不同生物质能源的政策网络在各阶段表现存在异同。全国人民代表大会和国务院始终是政策网络中的重要主体,各个阶段不同生物质能发文主体的角色和协调互动情况随政策变迁而变化。最后,在研究结论的基础上提出政策目标与政策工具统筹运用、建立有效的政策网络主体协同治理机制的启示。     

Evaluation of the stability of arsenic immobilized by microbial sulfate reduction using TCLP extractions and long-term leaching techniques

An investigation was conducted to evaluate the stability or leachability of arsenic immobilized by microbial sulfate reduction. Anoxic solid-phase samples taken from a bioreactor previously used to treat metal and As contaminated water using sulfate reducing bacteria (SRB) were subjected to the toxicity characteristic leaching procedure (TCLP) and long-term column leaching tests. The results from TCLP experiments showed that the concentration of As leached from solid-phase sulfide material (SSM) samples after an 18 h extraction time was <300 microgl(-1), which is below the current maximum Australian TCLP leachate value for As, and thus would not be characterized as a hazardous waste. In terms of percent total As leached, this was equivalent to <8.5% for SSM samples initially containing 61.3 mgkg(-1) As. The levels of As extracted by the TCLP was found to be significantly lowered or underestimated in the presence of dissolved oxygen, with As concentrations increasing with decreasing headspace-to-leachant volume ratios. The concentration of As was also consistently higher in nitrogen purged extractions compared to those performed in air. This was attributed to the dissolution of Fe-sulfide precipitates and subsequent oxidation of Fe(II) ions and precipitation of ferric(hydr)oxides, resulting in the adsorption of soluble As and corresponding decrease in As concentrations. According to the experimental data, it is recommended that TCLP tests for As leachability should be performed at least in zero-headspace vessels or preferably under nitrogen to minimize the oxidation of Fe(II) to ferric(hydr)oxides. In long-term leaching studies (approximately 68 days), it was found that the low solubility of the SSM ensured that rate of release of As was relatively slow, and the resulting leachate concentrations of As were below the current Australian guideline concentration for arsenic in drinking water.     

Base cation deposition in europe-part I. Model description, results and uncertainties

Deposition of base cations (Na⁺, Mg²⁺, Ca²⁺, K⁺) in Europe was mapped for 1989 with a spatial resolution of 10 x 20 km using the so-called inferential modeling technique. Deposition fields resembled the geographic variability of sources, land-use and climate. Dry deposition constituted on average 45% of the total base cation deposition in Europe. Modeled deposition estimates compared reasonably well with deposition estimates derived from throughfall and bulk-precipitation measurements made at 174 sites scattered over Europe. Using error propagation, the random and systematic error in total deposition for an average grid cell of 10 x 20 km was estimated to equal 35–50% and 25–40%, respectively. Within individual grids a relatively large variability in deposition is expected.